Home › Areas › East London › Selborne
Home Inspection in Selborne
A home inspection in Selborne typically costs R2,500 to R7,000 and takes two to four hours on site. The local stock is mostly family homes from the 1940s–1980s period, so an inspector here concentrates on salt-air corrosion and condensation from ambient humidity. You get a written photographic report with a prioritised defect list.
Buying in Selborne means buying into a specific set of building problems, not a generic one. Selborne is characterised by family homes from the 1940s–1980s period, in a humid subtropical edge, marine exposure, rainfall through the year setting.
Established suburb where humidity-driven condensation is routinely misdiagnosed as a building leak.
What inspectors actually find in Selborne
- Salt-air corrosion
- Marine air attacks roof-sheeting fixings, balustrades, gutter brackets, window hardware and reinforcing close to the surface of concrete. The first sign is usually a rust stain on a ceiling or a soffit rather than visible corrosion, because the fixing fails before the finish does.Checked: Roof fixings, balustrade bases, lintels and any exposed steel
- Condensation from ambient humidity
- Where the air holds this much moisture, any surface below dew point collects water — inside wardrobes, behind headboards, in closed rooms and on the cold side of air-conditioned homes. The building is not leaking at all, and waterproofing it changes nothing.Checked: Relative humidity, surface temperatures, extraction and air movement
- Termite and borer activity
- Sustained warmth and humidity keep timber under constant pressure. Roof timbers, skirtings, built-in joinery and suspended floors are all at risk, and damage is typically well advanced before it becomes visible.Checked: Roof timbers, skirtings, subfloor and any Oregon pine element
- Ageing electrical installations
- Pre-1990 installations often carry old wiring, no earth leakage protection, and boards extended piecemeal over decades. A certificate of compliance is a legal requirement on transfer and is frequently the largest unbudgeted cost in an older-suburb purchase.Checked: Distribution board, earth leakage, visible wiring, bonding
Compliance certificates in Buffalo City
Whatever the inspection finds, a transfer in Buffalo City needs an electrical certificate of compliance, which is required on every transfer and valid for two years, a gas certificate of conformity where there is a gas installation. These are statutory documents issued by registered installers, each with its own fee. A home inspection is an advisory condition report and never replaces one.
What it costs
| Item | Indicative range | Notes |
|---|---|---|
| Standard pre-purchase inspection | R2,500 – R4,500 | Most homes; includes the written report |
| Larger property or multiple structures | R4,500 – R7,000 | Cottages, outbuildings and smallholdings |
| Specialist add-on (damp, thermal, asbestos) | R900 – R2,500 | Where the main inspection flags it |
| Electrical certificate of compliance | R900 – R2,500 | Separate statutory cost, by a registered installer |
Indicative market ranges for guidance, not quotes. Full cost breakdown →
Get a quote for Selborne
Tell us about the property and we’ll match you with a verified inspector who covers Selborne.
Request sent
Thanks — we have your details for Selborne and will come back to you within one working day with a quote and available dates.
Nothing is booked and you are under no obligation. If it is urgent, email hello@homeinspect.co.za.
Frequently asked questions
How much does a home inspection cost in Selborne?
Between about R2,500 and R7,000, depending on the size of the property and how many separate structures there are. Most family homes in Selborne fall in the R3,000 to R4,500 range for a standard pre-purchase inspection.
What do inspectors find most often in Selborne?
Given the 1940s–1980s stock, the recurring findings are salt-air corrosion, condensation from ambient humidity, termite and borer activity, ageing electrical installations. Marine air attacks roof-sheeting fixings, balustrades, gutter brackets, window hardware and reinforcing close to the surface of concrete. The first sign is usually a rust stain on a ceiling or a soffit rather than visible corrosion, because the fixing fails before the finish does.
How long does an inspection take in Selborne?
Two to four hours on site for most properties, with the written report following within 24 to 48 hours. Larger properties and those with multiple structures take longer.
Do I need compliance certificates as well?
Yes, and they are separate from the inspection. A transfer in Buffalo City needs an electrical certificate of compliance, which is required on every transfer and valid for two years, a gas certificate of conformity where there is a gas installation. An inspection is an advisory condition report and never replaces a certificate.
Is an inspection worth it if the house looks fine?
The defects that matter in Selborne are mostly not visible on a viewing — salt-air corrosion in particular shows up on instruments and in the roof space long before it shows on a wall. Most South African sales are concluded voetstoots, so after transfer these become entirely yours.
A property in Selborne with all of this checked and documented is a straightforward purchase. The risk is in not knowing.
Nearby areas
- Home inspection in Beacon Bay
- Home inspection in Vincent
- Home inspection in Gonubie
- Home inspection in Nahoon
- Home inspection in Bonza Bay
- Home inspection in Berea
Mould & damp inspection in Selborne → · All East London areas → · Mould & Damp Inspection guide →