Home › Areas › Cape Town › Table View
Home Inspection in Table View
A home inspection in Table View typically costs R2,500 to R7,000 and takes two to four hours on site. The local stock is mostly family homes and townhouse complexes from the 1980s–2000s period, so an inspector here concentrates on salt-air corrosion and winter driven rain. You get a written photographic report with a prioritised defect list.
Buying in Table View means buying into a specific set of building problems, not a generic one. Table View is characterised by family homes and townhouse complexes from the 1980s–2000s period, in a flat, highly exposed to south-easter and marine air setting.
Flat and fully exposed to the south-easter, so roof sheeting fixings and ridge detail take more load than almost anywhere in the city.
What inspectors actually find in Table View
- Salt-air corrosion
- Marine air attacks roof-sheeting fixings, balustrades, gutter brackets, window hardware and reinforcing close to the surface of concrete. The first sign is usually a rust stain on a ceiling or a soffit rather than visible corrosion, because the fixing fails before the finish does.Checked: Roof fixings, balustrade bases, lintels and any exposed steel
- Winter driven rain
- Cape winter fronts arrive from the north-west and west. Elevations facing into them take sustained wetting that a sheltered wall never sees, and old face-brick, cracked plaster or perished sealant lets it through.Checked: North-west and west elevations, window perimeters, wall cracking
- Sectional title boundary disputes
- Where water enters through common property — roof, parapet, external wall or common plumbing — the Sectional Titles Schemes Management Act puts the repair on the body corporate, even though the damage shows inside the section. A written report identifying the entry point is what settles the argument.Checked: Point of entry, and whether it sits on common property or in the section
- Low-lying and reclaimed ground
- A high water table and made-up ground produce settlement and persistent subfloor moisture. Wind-driven rain on exposed elevations compounds it where there is little surrounding shelter.Checked: Floor levels, subfloor ventilation, external drainage, wall cracking
Compliance certificates in City of Cape Town
Whatever the inspection finds, a transfer in City of Cape Town needs an electrical certificate of compliance, which is required on every transfer and valid for two years, a water installation certificate — a City of Cape Town bylaw requirement that applies nowhere else in South Africa, a gas certificate of conformity where there is a gas installation. These are statutory documents issued by registered installers, each with its own fee. A home inspection is an advisory condition report and never replaces one.
What it costs
| Item | Indicative range | Notes |
|---|---|---|
| Standard pre-purchase inspection | R2,500 – R4,500 | Most homes; includes the written report |
| Larger property or multiple structures | R4,500 – R7,000 | Cottages, outbuildings and smallholdings |
| Specialist add-on (damp, thermal, asbestos) | R900 – R2,500 | Where the main inspection flags it |
| Electrical certificate of compliance | R900 – R2,500 | Separate statutory cost, by a registered installer |
Indicative market ranges for guidance, not quotes. Full cost breakdown →
Get a quote for Table View
Tell us about the property and we’ll match you with a verified inspector who covers Table View.
Thanks — we have your details and will come back to you within one working day.
Something went wrong. Please email hello@homeinspect.co.za.
Frequently asked questions
How much does a home inspection cost in Table View?
Between about R2,500 and R7,000, depending on the size of the property and how many separate structures there are. Most family homes and townhouse complexes in Table View fall in the R3,000 to R4,500 range for a standard pre-purchase inspection.
What do inspectors find most often in Table View?
Given the 1980s–2000s stock, the recurring findings are salt-air corrosion, winter driven rain, sectional title boundary disputes, low-lying and reclaimed ground. Marine air attacks roof-sheeting fixings, balustrades, gutter brackets, window hardware and reinforcing close to the surface of concrete. The first sign is usually a rust stain on a ceiling or a soffit rather than visible corrosion, because the fixing fails before the finish does.
How long does an inspection take in Table View?
Two to four hours on site for most properties, with the written report following within 24 to 48 hours. Larger properties and those with multiple structures take longer.
Do I need compliance certificates as well?
Yes, and they are separate from the inspection. A transfer in City of Cape Town needs an electrical certificate of compliance, which is required on every transfer and valid for two years, a water installation certificate — a City of Cape Town bylaw requirement that applies nowhere else in South Africa, a gas certificate of conformity where there is a gas installation. An inspection is an advisory condition report and never replaces a certificate.
Is an inspection worth it if the house looks fine?
The defects that matter in Table View are mostly not visible on a viewing — salt-air corrosion in particular shows up on instruments and in the roof space long before it shows on a wall. Most South African sales are concluded voetstoots, so after transfer these become entirely yours.
A property in Table View with all of this checked and documented is a straightforward purchase. The risk is in not knowing.